Battery Charging Instructions for Extending Battery Life

06 Mar.

New batteries are shipped in a discharged condition and must be charged before use. We generally recommend an overnight charge (approximately twelve hours). Refer to the user’s manual for charging instructions.

Rechargeable batteries should be cycled - fully charged and then fully discharged - two to four times initially to allow them to reach their full capacity. (Note: it is normal for a battery to become warm to the touch during charging and discharging).

New batteries are hard for the device to charge; they have never been fully charged and are therefore “unformed”. Sometimes the device’s charger will stop charging a new battery before it is fully charged. If this happens, remove the battery from the device and then reinsert it. The charge cycle should begin again. This may happen several times during the first battery charge. Don’t worry; it’s perfectly normal.

How Can I Maximize Battery Performance?
There are several steps you can take to insure that you get maximum performance from the battery:
Break In New Batteries

New batteries come in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge the new battery two to four times to allow it to reach its maximum rated capacity.

Prevent the Memory Effect
Keep the battery healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are Li-Ion batteries, which do not suffer from the memory effect.

Keep the Batteries Clean
It’s a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and the portable device.

Exercise the Battery
Do not leave the battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If a battery has not been used for a long period of time, perform the new battery break in procedure described above.

Battery Storage
If you don’t plan on using the battery for a month or more, we recommend storing it in a clean, dry, cool place away from heat and metal objects. NiCad, NiMH and Li-Ion batteries will self-discharge during storage; remember to break them in before use. Sealed Lead Acid (SLA) batteries must be kept at full charge during storage. This is usually achieved by using special trickle chargers. If you do not have a trickle charger, do not attempt to store SLA batteries for more than three months.

For Notebook Users
To get maximum performance from the battery, fully optimize the notebooks power management features prior to use. Power management is a trade off: better power conservation in exchange for lesser computer performance. The power management system conserves battery power by setting the processor to run at a slower speed, dimming the screen, spinning down the hard drive when it’s not in use and causing the machine to go into sleep mode when inactive. The notebook users guide will provide information relating to specific power management features.

Bobby George is a technical consultant at LowCostBatteries.com. Please visit the sight for more articles.

http://www.lowcostbatteries.com
bobby@lowcostbatteries.com

Print This Article :

Random Posts

This entry was posted on Thursday, March 6th, 2008 at 12:00 am and is filed under Science. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Tanpola Articles Directory